The AconityMINI represents Acontiy3D’s entry-level AM system. A build space of Ø 140 mm, which can be optionally downsized to Ø 55 mm, and full access to all relevant process parameters, allow for efficient material research and fast part production also for small batches. The AconityMINI is extremely gas tight for low residual oxygen contents of < 100 ppm. Equipped with a strong recirculation, this system allows for processing also highly reactive materials which exhibit large amounts of weld fumes.

As for all Aconity systems, the AconityMINI may be equipped with further options such as, 800°C preheating, process monitoring, but also a unique vacuum option and a micro-configuration.

The AconitySTUDIO control software allows for full control of all relevant process parameters as well as remote access through the web-interface.


Build space
Ø 140 mm x H 190 mm
Ø 55 mm x H 190 mm
Laser configuration
Single Mode 200 W / 400 W
Optics configuration / Spot size
F-Theta / 30 – 50 μm
3D Scanning / 80 – 500 μm
Process monitoring options
Coaxial pyrometer
Coaxial high speed CMOS
Preheating temp / build size
500 °C / Ø 140 mm x H 130 mm
800 °C / Ø 100 mm x H 130 mm
Layer thickness
Down to 10 µm
Max scan speed
12 m/s
Inert gas type / pressure
Argon 4.6 / 6 bar
Nitrogen / 6 bar
Vacuum / < 1mbar
Inert gas consumption
< 5 l/min during process
< 30 l/min during purging
0 for vaccum
Residual oxygen content
< 100 ppm
Pressurized air type / pressure
ISO 8573-1:2010 [1:4:1] / 6 bar
Pressurized air consumption
< 50 l/min
Machine dimensions (W x D X H)
2450 mm x 1500 mm x 2320 mm
Machine weight w/o powder
850 kg

In the News...
Aconity GREEN

Aconity3D has built the first component from pure copper (CU-ETP). The work was performed on an AconityMINI with a laser in the green wavelength range.

The integration of a laser beam source in the green wavelength range is offered as option for the AcontiyMINI.
Visit our online configurator at: to configure your personal setup.

Read more